A corner building on Myrtle Avenue where the street floor is glass from end to end. We installed the storefront that wraps the corner, the entrance doors for the medical tenants, and the window wall on the floors above.
StorefrontEntrance doorsWindow wall
Finished corner at 55-01 Myrtle Avenue: storefront at grade, window wall above
What we installed
Aluminum storefront wrapping the full corner at street level
Storefront entrance doors with closers, pulls and locks
Insulated glass throughout the ground floor
Window wall glazing on the upper floors
Project
Storefronts
Location
Ridgewood, Queens
Building
Mixed-use corner building, medical retail at grade
Installed
Storefront, Entrance doors, Window wall
Our role
Glazing installation by our own crews
How we install storefronts
Measure on site
We field-measure every opening once the slab and steel are in, so the frames are made to the building as built, not to the drawings.
Set the framing
Storefront frames are anchored, shimmed plumb and flashed at the sill, with corner mullions set first so both elevations meet cleanly.
Glaze and hang the doors
Glass goes in, then the entrance doors are hung and the closers, pulls and locks adjusted for an even swing.
Seal and hand over
Perimeter sealant, glass cleaned and labels pulled, then a punch-list walk with you or your builder before turnover.
Finished work
More photos from 55-01 Myrtle Avenue
Upper-floor glazing above the storefront signageStorefront entrance doors, open for businessWindow wall turning the corner above the ground floorStorefront glass under the louvered canopy
Similar job?
Send a few phone photos and get a ballpark within one business day.
