A slate-clad corner building in Williamsburg with retail at street level. We installed the ground-floor storefronts that wrap the corner and the divided aluminum windows on the floors above.
StorefrontsAluminum windows
Finished corner at 625 Driggs Avenue, Williamsburg
What we installed
Aluminum storefronts wrapping the corner
Storefront entrance doors for the retail tenants
Divided aluminum windows on the upper floors
Sealant and flashing at the slate cladding
Project
Storefronts and windows
Location
Williamsburg, Brooklyn
Building
Mixed-use building, retail at grade
Installed
Storefronts, Aluminum windows
Our role
Glazing installation by our own crews
How we install storefronts
Measure on site
We field-measure every opening once the slab and steel are in, so the frames are made to the building as built, not to the drawings.
Set the framing
Storefront frames are anchored, shimmed plumb and flashed at the sill, with corner mullions set first so both elevations meet cleanly.
Glaze and hang the doors
Glass goes in, then the entrance doors are hung and the closers, pulls and locks adjusted for an even swing.
Seal and hand over
Perimeter sealant, glass cleaned and labels pulled, then a punch-list walk with you or your builder before turnover.
Finished work
More photos from 625 Driggs Avenue
Divided windows in the slate facadeStorefront glazing at street level
Similar job?
Send a few phone photos and get a ballpark within one business day.
