A mixed-use building with shops along the street and floors that step back in terraces. We installed the ground-floor storefronts and the window wall on the terraced floors above.
StorefrontsWindow wall
Shore Tower: storefronts at grade, window wall on the terraces
What we installed
Aluminum storefronts for each ground-floor tenant
Storefront entrance doors and hardware
Window wall across the stepped upper floors
Glazing sealed at every terrace setback
Project
Storefronts and window wall
Location
Brooklyn
Building
Mixed-use building, retail at grade, terraced floors above
Installed
Storefronts, Window wall
Our role
Glazing installation by our own crews
How we install storefronts
Measure on site
We field-measure every opening once the slab and steel are in, so the frames are made to the building as built, not to the drawings.
Set the framing
Storefront frames are anchored, shimmed plumb and flashed at the sill, with corner mullions set first so both elevations meet cleanly.
Glaze and hang the doors
Glass goes in, then the entrance doors are hung and the closers, pulls and locks adjusted for an even swing.
Seal and hand over
Perimeter sealant, glass cleaned and labels pulled, then a punch-list walk with you or your builder before turnover.
Finished work
More photos from Shore Tower
Window wall on the terraced upper floorsThe terraced floors below the Shore Tower sign
Similar job?
Send a few phone photos and get a ballpark within one business day.
