340 4th Avenue

A three-story retail building on 4th Avenue. We installed the ground-floor storefronts and the window wall on the floors above, on both street faces.

StorefrontsWindow wall

What we installed

Measure on site
We field-measure every opening once the slab and steel are in, so the frames are made to the building as built, not to the drawings.
Set the framing
Storefront frames are anchored, shimmed plumb and flashed at the sill, with corner mullions set first so both elevations meet cleanly.
Glaze and hang the doors
Glass goes in, then the entrance doors are hung and the closers, pulls and locks adjusted for an even swing.
Seal and hand over
Perimeter sealant, glass cleaned and labels pulled, then a punch-list walk with you or your builder before turnover.

Finished work